Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-145
434 Connection Status
This read only MMC will confirm the connection status of stations or trunks.
Display status actually displays the status of a station or trunk at the time requested.
If a conference is in progress with the selected trunk or station the display will show
one of the conference parties and an arrow(
"
). The technician or system
administrator can then display the next parties in the conference. If a station or trunk
is in an idle state the display will show ‘IDLE’. If the station or trunk selected is not a
valid selection the display will show ‘INVALID DATA’. If the station or trunk is
made busy by the CPU the display will show ‘MADE BUSY’. If the station is in
busy state with no other connection, the display will show ‘BUSY’ only.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
TRANSFER Exit
ACTION
PROCEDURE DISPLAY
Display trunk connection status
1. Press Transfer button and enter 434
DISPLAY STATUS
201 IDLE
2. Enter station or trunk number
Display show connection status
DISPLAY STATUS
702 227
3. Enter another station or trunk OR
Press transfer to exit
DISPLAY STATUS
702 227
Display station connection status
1. Press Transfer button and enter 434
DISPLAY STATUS
201 IDLE
2. Enter station or trunk number
Display show connection status
DISPLAY STATUS
235 703
3. Enter another station or trunk OR
Press transfer to exit
DISPLAY STATUS
235 703