Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-148 © SAMSUNG Electronics Co., Ltd.
436 Trunk TMC Gain
Allows loss levels for analog trunks to be adjusted on a per trunk basis. There are two
adjustments available in this MMC. ‘TX’ is the transmit level adjustment of the trunk
to the station. ‘RX’ is the receive level adjustment of the station to the trunk.
This MMC is not to correct low volume. To be used with the support of Samsung
Electronics Co. local distributor.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 436
Display shows
[701] TRK GAIN
RX:+0.0 TX:+0.0
2. Enter desired trunk number(e.g., 702) via the
dial keypad
[702] TRK GAIN
RX:+0.0 TX:+0.0
OR
Press Volume button to make selection
Press Right Soft button to move cursor
OR
Press ANS/RLS button to select ALL
[ALL] TRK GAIN
RX:+0.0 TX:+0.0
3. Press Volume button to make selection
Press Right Soft button to move cursor
[702] TRK GAIN
RX:+0.0 TX:+0.0
4. Press Volume button to make selection
Press Right Soft button to move cursor and
[701] TRK GAIN
RX:+0.0 TX:-2.5
return to step 2
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC