Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-154 © SAMSUNG Electronics Co., Ltd.
Timer Name Default Range Unit Description
CO CONFIRM TIME 3 0-250 MIN According to MMC 314 CO CONFIM type, the
outgoing call will be disconnected after this
timer or the outgoing caller will hear the
confirm tone every this time.
CO-CO
DISCONNECT
20 1-250 MIN This timer monitors the duration of an
unsupervised conference; when it expires,
both trunks are disconnected.
CONFIRM TONE TM 1000 100-2500
MSEC
The tone heard when a feature is activated or
deactivated.
DIAL PASS TIME 3 0-25 SEC This timer monitors the duration of time before
connecting the transmit of the phone to the
trunk side of an outgoing call.
DISA DISCONNECT 30 1-250 MIN This timer controls the maximum duration of a
DISA call.
DISA LOCK OUT TM 30 1-250 MIN This timer controls the duration of time a DISA
call is not allowed to be made after the DISA
error counter has expired(MMC 500).
DISA NOANS DISC. 30 0-250 SEC This timer controls the duration of time a DISA
call is disconnected by force when called party
does not answer.
DISA PASS CHECK 30 1-250 MIN This timer defines the time period before the
system clears the incorrect passcode counter.
DISPLAY DELAY TM 3 1-250 SEC This timer controls the duration a display is shown
in the LCD display. This timer also controls the
duration of time that error tone is heard.
DOOR LOCK RELES. 500 100-2500
MSEC
This timer controls the duration of time the
door lock relay will be activated.
DOOR RING DETECT 50 10-250
MSEC
This timer controls the duration of time before
a call is answered by the door phone.
DOOR RING OFF TM 30 1-250 SEC This timer controls the duration of ringing at
the door ring destination before automatically
cancelling.
E-HOLD RECALL TM 45 0-250 SEC This timer controls the duration of time a call is
held exclusively at a station before recalling.
FIRST DIGIT TIME 10 1-250 SEC This timer controls how long the system will
wait for dialling to begin before dropping the
dial tone and returning the you to error tone.
HOK FLASH MAX TM 180 20-2500
MSEC
This timer monitors the duration of a hook
switch flash to ensure that the flash is valid
and not a line noise or an accidental hook
switch bounce LONGEST duration.