Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-155
Timer Name Default Range Unit Description
HOK FLASH MIN TM 70 20-2500
MSEC
This timer monitors the duration of a hook
switch flash to ensure that the flash is valid
and not a line noise or an accidental hook
switch bounce SHORTEST duration.
HOOK OFF TIME 300 20-2500 MSEC This timer controls the time before dial tone is
sent to a single line station.
HOOK ON TIME 1000 20-2500 MSEC This timer sets the minimum amount of time that
the system will recognize as an SLT hang up.
INQUIRY RELEASE 30 1-250 SEC This timer monitors the duration of the
interaction of the Soft button to determine
when to return the LCD back to a normal
status. This timer affects only display phones.
INTER DIGIT TIME 10 1-250 SEC This timer controls the grace period between
dialling valid digits before dropping the call
and returning you back to error tone.
ISDN INT DGT TM 7 1-15 SEC This timer controls the grace period between
dialling valid digits and the end of the dialling
string on an ISDN call.
KMMC LOCK OUT TM 30 10-250 SEC This timer controls the grace period between
programming actions while in a programming
session. The timer automatically returns the
system to secure programming status.
LCR ADVANCE
TIME
5 1-250 SEC This timer controls the duration of time before
selecting the next allowable route when a
station is allowed to route advance.
LCR INTER DIGIT 5 1-250 SEC This timer controls the grace period between
dialling valid digits before accessing a trunk.
LONG KEY DETECT 600 0-2500 MSEC This timer controls the time a key must be held
down before the key press is repeated.
LONG KEY REPEAT 300 0-2500 MSEC This timer controls the time between repeated
digits on a long key press.
MS LED ON TIME 10 1-10 SEC This timer controls the duration a Manual
Signalling key will remain on after use.
OFF HOOK RING INT 15 1-250 SEC This timer controls the duration of time
between ring bursts to a user who has a
camped-on call.
OHVA ANSWER
TIME
10 1-250 SEC This timer controls the time duration of an
OHVA call before automatic rejection.
PAGE TIME OUT 20 1-250 SEC This timer controls the duration of a page
announcement.