Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-156 © SAMSUNG Electronics Co., Ltd.
Timer Name Default Range Unit Description
PAGE TONE TIME 500 100-2500
MSEC
This timer controls the duration of tone burst
heard over the page prior to the page
announcement.
PARK RECALL TIME 45 0-250 SEC This timer controls the duration of time a call is
parked before recalling to the call park
originator.
PC-MMC LOCK TIME 5 1-60 MIN This timer monitors the PCMMC activity, drops
the link if no action is created by PCMMC and
returns the system back to secure program
status.
POWER DOWN TIME 2000 500-9900
MSEC
This timer monitors the power to the ROM
pack to begin shutdown status.
RECALL DISCONECT 2 1-250 MIN This is the time an attendant recall will ring
before being disconnected.
RECALL WAIT TIME 15 0-250 SEC This is the time any recall(hold or transfer)
continues to recall at your station before it
recalls to the operator.
ROUTE OPTIMISE 5 0-250 SEC When the call is made via Q-SIG signalling,
the route optimization is activated after this
time.
SMDR START/DP 30 1-250 SEC This grace period timer starts SMDR recording
for rotary
SMDR START/DTMF 15 1-250 SEC This grace period timer starts SMDR recording
for touchtone dialling. This timer also controls
the LCD duration timer on the phones. The
duration time displayed and the SMDR time
duration will be the same.
SYS HOLD RECALL 45 0-250 SEC This timer determines the time calls can be left
on hold before recalling back to the holding
station. This is a system-wide timer. Setting
timer to 000 will defeat this feature and no
recalling will take place.
TRANSFER RECALL 20 0-250 SEC This timer determines the time transferred
calls ring before recalling. This is a system-
wide timer.
TSW CONN. DELAY 0 0-10 SEC When incoming trunk makes outgoing call to
another trunk, the system connects voice path
after this time.