Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-164 © SAMSUNG Electronics Co., Ltd.
506 Tone Cadence
Provides the ability to customize the tone cadence on a system-wide basis.
The system can provide eleven types of tone and three types of tones provided from
Central Office or PBX system can be detected. Please call Technical Support before
changing any cadences as some systems may require default settings.
Tone Type Description
BUSY TONE The called station is busy.
CONFM/BARGE A feature has been successfully activated/cleared or a Barge In with Tone has
been performed.
DIAL TONE The system is ready to interpret key presses/dialled digits.
DND/NO MORE The called station is in DND or has no free CALL buttons.
ERROR TONE An error has been made.
HOLD/CAMPON This is the system generated hold tone.
MSGWAT TONE This is the tone heard at an SLT with a message waiting.
RGBACK TONE The called station is ringing.
RING TONE This is the tone heard from ROP device or Loud Bell when these devices are
called.
TRANSFERER
TONE
This is the tone heard when the transfer button is pressed or an SLT hook
flashes.
DID RNGBACK This is the tone heard by the outside party when they dial a DID number.
CO BUSY TONE This is used to detect the busy tone provided from Central Office or PBX system.
CO RING BACK This is used to detect the ring back tone provided from Central Office or PBX
system.
CO DIAL This is used to detect the dial tone provided from Central Office or PBX
system.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 506
Display shows
BUSY TONE
INTERRUPT TONE