Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-165
2. Dial tone number from above list(00-13, e.g., 09)
OR
TRANSFERER TONE
INTERRUPT TONE
Press Volume button to select tone, press Left
Soft button and advance to step 3
3. Dial tone option 0 for CONTINUOUS or 1 for
INTERRUPT
TRANSFERER TONE
INTERRUPT TONE
OR
Press Volume button to select tone control and
press Right Soft button to advance step 4
OR
Press Left Soft button to return to step 2
4. Dial new value for interrupt times
(must be four digits)
TRANSFERER TONE:0100
9900 0100 9900
Press Right Soft button advances cursor
Press Left Soft button retreats cursor
If valid entry, system returns to step 2
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
[Unit : milliseconds]
Tone On Off On Off
BUSY TONE 350 350 350 350
CONFIRM/BARGE-IN 250 250 250 1250
DIAL TONE CONTINUOUS
DND/NO MORE TONE 250 250 250 250
ERROR TONE 200 200 200 200
HOLD/CAMP-ON TONE 500 3500 500 3500
MESSAGE WAIT TONE 1000 250 1000 250
RING BACK TONE 1000 4000 1000 4000
RING TONE 1000 2000 1000 2000
TRANSFER TONE 100 100 100 100
DID RING BACK
TONE
1000 2000 1000 2000
CO BUSY TONE 350 350 350 350
CO RING BACK TONE 1000 4000 1000 4000
CO DIAL TONE CONTINUOUS