Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

508 Call Cost

Allows the system administrator to set the Call Cost attributes generated by the

system during a call. This information can be displayed on the phone LCD during a

call or as an SMDR record.

No Display Description

0 UNIT COST PER MP When the system is installed to receive MP on a C. O. outgoing

call. It is used for generating total call cost by multiplying it by the

number of pulses. Allows a maximum value of 9999.

1 CALL COST RATE This generates additional call cost calculated by multiplying this rate

by the original call cost. Ranges from 100 through 255.

Changing this value when there is a call in progress may result in an inaccurate call

cost. This MPD facility requires the Metering Pulse Detection version of the trunk

card.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 508

Display shows

UNIT COST PER MP

0100PESET

2. Dial 0 OR 1(e.g., 1)

CALL COST RATE

100 %

Press Volume button to select , and press

Right Soft button to move cursor

3. Enter new value(e.g., 110 for 110 percent)

System returns to step 2

CALL COST RATE

110 %