Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

510 SLI Ring Cadence

Provides the ability to customize the ring cadence for single line ports on a system-

wide basis. There are 5 cadences available. Please call Technical Support before

changing any cadences as some peripheral systems may require default settings.

No Ring Type Description

1 STN RING This is the cadence intercom calls will ring at.

2 TRK RING This is the cadence trunk calls will ring at.

3 DOOR RING This is the cadence door phone calls will ring at.

4 ALM RING This is the cadence alarm reminder calls will ring at.

5 CBK RING This is the cadence callbacks will ring at.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 510

Display shows

1:STN RING :0400

0200 0400 3000

2. Dial cadence number from above list(e.g., 3)

3:DOOR RING:0400

0100 0400 2000

Press Volume button to select , press LEFT

Soft button and advance to step 3

3. Dial new value for interrupt times

(must be four digits)

3:DOOR RING:0100

9900 0100 9900

Press Right Soft button advances cursor

Press Left Soft button retreats cursor

If valid entry, system returns to step 2

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC