Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-186 © SAMSUNG Electronics Co., Ltd.
5. Enter valid trunk number(e.g., 701)
OR
[9] TRK GROUP
MEMBER 01:701
Press Volume button to make selection and press
Right Soft button to return to step 2
6. Repeat steps 1-5 to remove trunk from group 9 if
necessary
7. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
ALL LOOP/ISDN TRUNKS : 9
ALL TIE TRUNKS : 801
ALL VOIP NETWORKING TRUNKS : 803
ALL VOIP H.323 TRUNKS : 804
ALL VOIP SIP TRUNKS : 805
RELATED ITEMS
LCR PROGRAMMING
VOIP NETWORKING FEATURE
VOIP GATEWAY FEATURES