Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-188 © SAMSUNG Electronics Co., Ltd.
605 Assign External Page Zone
Determines which relays will close when one of the four external page zones is accessed.
One external page port and one optional port are located on the the base board. The
page relay has default DNs of 361. Optional relay has 362.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 605
Display shows first page zone
EXT. PAGE ZONE(5)
MEMBER 1 :NONE
2. Dial page zone number(e.g., 6)
OR
EXT. PAGE ZONE(6)
MEMBER 1 :NONE
Use Volume button to select desired page zone
numbers and press Right Soft button to move the
cursor
3. Dial member number(e.g., 3)
OR
EXT. PAGE ZONE(6)
MEMBER 3 :NONE
Use Volume button to select member numbers
and press Right Soft button to move the cursor
OR
Press Left Soft button to return to step 2 above
4. Dial relay number via dial keypad(e.g., 362)
and press Right Soft button to return to step 2
EXT. PAGE ZONE(6)
MEMBER 3 :362
OR
Press Left Soft button to return to step 3 above
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC