Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-190 © SAMSUNG Electronics Co., Ltd.
606 Assign Speed Block
Provides a means of adding or deleting speed dial blocks to the system or an
individual phone. With the ability to delete a block or blocks of speed dial, it will not
be necessary to waste these on such items as voice mail, DPIMs or stations that do
not require the ability to use speed dial. The Free List will show how many bins are
left to be assigned.
A library of up to 2500 speed dial numbers may be allocated as needed. The system
list can have up to 500 numbers and each station can have up to 50 numbers. Speed
dial numbers are assigned in blocks of ten. Each speed number may contain up to 24
digits.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear entry
!
TRANSFER Used to exit programming
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 606
Display shows
FREE LIST:20
SYSTEM:20
2. Press Right Soft button to advance next line.
FREE LIST:20
SYSTEM:20
OR
You can view BUSY LIST using Volume button
BUSY LIST:180
SYSTEM:20
3. Make a selection of SYSTEM or EXT using
Volume button and press Right Soft button to
FREE LIST:20
EXT201:1
advance cursor
4. Enter desired extension number via dial keypad
(e.g., 205)
FREE LIST:20
EXT205:1
OR
Press Volume button to make selection and press
Right Soft button to advance cursor