Installation guide

CHAPTER 1. Before Programming OfficeServ 12 Programming Guide/Ed.00
Page 1-8 © SAMSUNG Electronics Co., Ltd.
4.2 Operator Level Programming
4.2.1 System Related MMC
MMC Program No Program Description
MMC : 200 Open Customer Programming
MMC : 201 Change Customer Passcode
MMC : 202 Change Feature Passcode
MMC : 203 Assign UA Device
MMC : 204 Common Bell Control
MMC : 205 Assign Loud Bell
MMC : 206 Barge-In Type
MMC : 207 Assign VM/AA Port
MMC : 208 Assign Ring Type
MMC : 209 Assign Add-On Module
MMC : 210 Customer On/Off per Tenant
MMC : 211 Door Ring Assignment
MMC : 214 DISA Alarm Ringing Station
MMC : 217 Traffic Report Option
MMC : 219 Common Relay Service Type
MMC : 220 ISDN Service Type
4.2.2 Station Related MMC
MMC Program No Program Description
MMC : 300 Customer On/Off per Station
MMC : 301 Assign Station COS
MMC : 302 Pickup Groups
MMC : 303 Assign Boss/Secretary
MMC : 304 Assign Extension/Trunk Use
MMC : 305 Assign Forced Code
MMC : 306 Hot Line/Off Hook Selection
MMC : 308 Assign Background Music Source
MMC : 309 Assign Station MOH Source
MMC : 310 LCR Class Service
MMC : 312 Allow Caller ID
MMC : 314 Confirm Outgoing Call
MMC : 315 Customer Set Relocation
MMC : 316 Copy Station/Trunk Use
MMC : 317 Assign Station/Station Use
MMC : 318 Distinctive Ringing