Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-196 © SAMSUNG Electronics Co., Ltd.
614 Station/Trunk Use Group
This program allows you to set a call group in which each station or Trunk line is
included. It is useful if you want to limit a call between stations, outgoing calls
through a Trunk line, or call-pickup.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear entry
!
TRANSFER To exit programming
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 614
Display shows first station
STATION GROUP
201:001
2. Enter [0] if you want to set a call group to a station.
Enter [1] if user want to set a call
TRUNK GROUP
701:301
group to a trunk
OR
Press Volume button to make selection and press
Right Soft button to advance cursor
3. Enter a number you want
OR
TRUNK GROUP
702:301
Press Volume button to make selection and
press Right Soft button to advance cursor
4. Enter the number of the call group you
want to set
TRUNK GROUP
702:302
OR
Press Volume button to make selection and
press Right Soft button to advance cursor
5. Press Transfer button and enter to exit the
program
OR
Press Speaker button to move on to the next
program