Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-198 © SAMSUNG Electronics Co., Ltd.
615 MGI Group
This optional program sets designated MGI ports for specific services. This allows
‘grading’ of MGI card for traffic conditions. The MGI ports can be segregated into
groups. Keep in mind that any entries made here can be ineffective,
if conflicting entries exist in MMC616.
No MGI Port Type Description
0 LOCAL ITP This determines what MGI ports can be used with ITP phones across a
private IP network
1 PUB IP ITP This determines what MGI ports can be used with ITP phones on a public
IP network.
2 VOIP NTWK This determines what MGI ports can be used for enhanced proprietary
Samsung VoIP networking between OfficeServ 12 systems across a
private IP network.
3 PUB IP NTWK This determines what MGI ports can be used for enhanced proprietary
Samsung VoIP networking between OfficeServ 12 systems on a public IP
network
4 VOIP TRUNK This determines what MGI ports can be used as industry-standard H.323
or SIP VoIP trunks for communications across a private network
5 PUB IP TRK This determines what MGI ports can be used as industry-standard H.323
or SIP VoIP trunks for communications on a public network
6 MGI3 NEEDED This determines what MGI ports can be used for T.38 facsimile
communications across a private network.
7 PUB IP MGI3 This determines what MGI ports can be used for T.38 facsimile
communications on a public network.
8 ITP PAGED This determines what MGI ports can be used with station page to ITP
phones across a private IP network
The MGI ports can be allow two selection modes : Sequential or Distributed.
The members of each selection are the actual ports on the MGI card.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC