Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-200 © SAMSUNG Electronics Co., Ltd.
616 MGI User
This optional program selects which specific MGI ports will be dedicated on a per-
port basis for IP station/trunk devices. If this MMC is not utilized, allocation of MGI
ports will be controlled by MMC615. By defining dedicated MGI port usage, the IP
station/trunk selected will always use the port programmed. MGI ports can be
assigned for digital stations(2XX), private and public ITP stations(32XX), VoIP
Networking trunks(83XX), H.323 trunks(84XX), SIP trunks(85XX). Only one
assignment per MGI port is permitted. Any entries made here will override entries
made in MMC615.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 616
Display shows the first available option
[3801] MGI USER
NONE
2. Enter MGI dial number
OR
[3801] MGI USER
NONE
Press Volume button to select an MGI port and
press Right Soft button to move cursor
3. Enter MGI user dial number
OR
[3801] MGI USER
NONE
Press Volume button to select an MGI user and
press Right Soft button to store and move cursor
4. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC