Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-203
701 Assign COS Contents
Similar to MMC 700 but does not allow a copy command. This MMC is primarily
used for creating a new class of service. If the unsupervised conference feature is
allowed, a programmed CONF key must be available to allow re-entry into a
conference call. There are 30 classes of service available.
This MMC is divided into 4 categories.
No COS/Description
TOLL LEVEL0
0
1
2
3
4
5
6
7
A Follow toll class A(Unrestricted)
B Follow toll class B in MMC 702, 703
C Follow toll class C in MMC 702, 703
D Follow toll class D in MMC 702, 703
E Follow toll class E in MMC 702, 703
F Follow toll class F in MMC 702, 703
G Follow toll class G in MMC 702, 703
H Follow toll class H(All restricted)
USABLE FEATURES
No COS DEFAULT DESCRIPTION
00 AA CALER YES Auto answer control by caller
01 ABSENCE YES Absence
03 AUTO RDL YES Retry on busy
04 CALLBACK YES Callback
05 CLIP ABN YES Caller ID Abandon
06 CLIP INQ YES Caller ID Inquire
07 CLIP INV YES Caller ID Investigate
08 CONFER. YES Conference
09 DALM CLR YES DISA alarm ring clear
10 DIRECT. YES Directory dial
11 DISA YES Allow DISA use
12 DND YES Do Not Disturb
13 DND FWRD YES Forward Do Not Disturb
14 DND OVRD NO Do Not Disturb override
15 DOOR YES Door ring answer
1
16 DSS YES Direct station select