Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-207
702 Toll Deny Table
Provides a way to make toll restriction(call barring) very easy and flexible. There are
500 entries allowed in the deny and each entry index can be assigned to a class of
service. Each index can have up to 12 digits. With the use of wild cards(MMC 704
Assign Wild Character), more flexibility can be built into toll restriction. Wild cards
can be used repeatedly in the dial string, limited only to what is allowed or denied in
MMC 704. There are six toll levels, B to G, that are programmable. Toll level A is set
as unrestricted by default and toll level H is set as in-house only by default.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
A Used to wild card X entered
!
B Used to wild card Y entered
!
C Used to wild card Z entered
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 702
Display shows
DENY(001):BCDEFG
:000000
2. Dial index number.(e.g., 005)
OR
DENY(005):BCDEFG
:000000
Press Volume button to select index and press
Right Soft button to move cursor
3. Enter toll pattern via dial keypad(e.g., 212)
DENY(005):BCDEFG
212 :000000
OR
Enter wild card(e.g., 21X) from above list and
press Right Soft button to move cursor to COS
DENY(005):BCDEFG
21X :000000
options
4. Press Volume button to move cursor along line
until under toll class mark(e.g., E)
DENY(001):BCDEFG
212 :000100