Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-209
703 Toll Allowance Table
Provides a way to make toll restriction very easy and flexible. There are 250
allowable entries in the allow table for a OfficeServ 12 system and each entry index
can be assigned to a class of service. Each index can have up to 12 digits. With the
use of wild cards(MMC 704 Assign Wild Character), more flexibility can be built
into toll restriction. There are six toll levels, B to G, that are programmable. Toll level
A is set as unrestricted by default, and toll level H is set as in-house only by default.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
A Used to wild card X entered
!
B Used to wild card Y entered
!
C Used to wild card Z entered
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 702
Display shows
ALOW(001):BCDEFG
:000000
2. Dial index number.(e.g., 005)
OR
ALOW(005):BCDEFG
:000000
Press Volume button to select index and
press Right Soft button to move cursor
3. Enter toll pattern via dial keypad(e.g., 202)
ALOW(005):BCDEFG
202 :000000
OR
Enter wild card(e.g., 21X) from above list and
press Right Soft button to move cursor to COS
ALOW(005):BCDEFG
20X :000000
options
4. Press Volume button to move cursor along line
until under toll class mark(e.g., E)
ALOW(001):BCDEFG
202 :000100