Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-215
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
TRANSFER Used to exit MMC
!
ANS/RLS Used to save the speed dial number and name to the MMC 728
CID translation table.
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 706
Display shows
SYS SPEED NAME
500:
2. Dial system speed entry number(e.g., 505)
OR
SYS SPEED NAME
505:
Press Volume button to select entry number and
press Right Soft button to move cursor
3. Enter name using dial keypad and above table
and press Right Soft button to return to step 2
SYS SPEED NAME
505:TELECOMS
OR
Press the F key to toggle to speed dial number
to return to MMC 705, step 3
SYS SPEED DIAL
505:
4. If you want to save the speed dial number and
name data to the MMC 728 CLI translation
SYS SPEED NAME
ADD CLI XLT ?NO
table, Press ANS/RLS button
and dial 1 for YES.
(The speed dial number must be exist)
5. Press Right Soft button to return to step 2 above
OR
Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
NO NAMES
RELATED ITEMS
MMC 606 ASSIGN SPEED BLOCK
MMC 705 ASSIGN SYSTEM SPEED DIAL
MMC 728 CLIP NAME TRANSLATION