Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00

Page 2-216 © SAMSUNG Electronics Co., Ltd.

707 Authorization Code

Enables the authorization feature on a per-class of service selection. There are 100

available entries. Authorization codes can be up to 4 to 10 digits.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 707

Display shows

AUTHOR.CODE(001)

C:01

2. Dial code index number(e.g., 005)

AUTHOR.CODE(005)

C:01

Press Volume button to selected index number

and press Right Soft button to move cursor

3. Enter authorization code(minimum of four digits)

and a maximum of 10 digits via dial keypad

AUTHOR.CODE(005)

1234567890 C:01

(e.g., 1234567890)

and press Right Soft button to move cursor

4. Enter class of service number 01-30(e.g., 05)

AUTHOR.CODE(005)

1234567890 C:05

Press Volume button to select COS and press

Right Soft button to select and return to step 2

5. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

NONE