Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-220 © SAMSUNG Electronics Co., Ltd.
710 LCR Digit Table
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing
call placement. This table works in conjunction with LCR ROUTE TABLE, LCR
TIME TABLE and LCR MODIFY DIGITS TABLE. There is a maximum 2000 with
a digit string length of 10 numerical digits. This system automatically maintains
entered digit strings in numerical order. The characters * and # are also accepted for
use with feature codes.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 710
Display shows
LCR DIGIT (0001)
DIGIT:
2. Dial LCR entry(e.g., 0005)
OR
LCR DIGIT (0005)
DIGIT:_
Press Volume button to select entry and press
Right Soft button to move cursor
3. Enter LCR digit string via the dial keypad and
press Right Soft button
LCR DIGIT (0005)
DIGIT:305426
OR
Press Left Soft button to return to step 1
4. Enter digit length(max : 31)
Cursor will move to RT(route selection)
LCR DIGIT (0005)
LENGTH:10 RT:01
5. Enter RT(01-32)
Valid entry will return you to step 1
LCR DIGIT (0005)
LENGTH:10 RT:01
6. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC