Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-222 © SAMSUNG Electronics Co., Ltd.
711 LCR Time Table
This table gives the flexibility to the system, through the LCR ROUTES, to allow calls
placed at any given time of day to use the least cost trunk route that is available.
When LCR ROUTE ADVANCE is allowed, it is possible for calls to be placed on more
expensive trunks on any given time of day. There are four possible time entries per day ;
the start time of the next time period is the end time of the previous time period.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 711
Display shows
LCR TIME (SUN:A)
HHMM: LCRT:-
2. Dial day of week(SUN-SAT, e.g., WED)
OR
LCR TIME (WED:A)
HHMM: LCRT:-
Press Volume button to make day selection and
press Right Soft button
3. Dial time band(A-D, e.g., B)
OR
LCR TIME (WED:B)
HHMM: LCRT:-
Press Volume button to make selection and press
Right Soft button
4. Dial time via keypad(24-hour format, e.g., 0800)
Cursor moves to LCRT(reference MMC 712)
LCR TIME (WED:B)
HHMM:0800 LCRT:-
5. Dial time table number(1-4)
OR
LCR TIME (WED:B)
HHMM:0800 LCRT:1
Press Volume button to make selection and press
Right Soft button
6. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC