Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-224 © SAMSUNG Electronics Co., Ltd.
712 LCR Route Table
The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the
completion of an outward bound call. This table works in conjunction with LCR
DIGIT TABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED
DIGITS TABLE. After you dial a valid digit string, the system uses the LCR ROUTE
TABLE to select a specific predetermined trunk group. There is a maximum number
of 32 routes available. If more than one trunk group is available for call completion,
the system uses the first designated trunk group and then starts to utilise succeeding
trunk groups. If all trunk groups are busy in a selected route, call queue becomes
active and allocates trunks as they become available.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 712
Display shows
LCR ROUTE (01:1)
C:1 G:NONE M:---
2. Dial LCR ROUTE table number(e.g., 05)
OR
LCR ROUTE (05:1)
C:1 G:NONE M:---
Press Volume button to selected table and press
Right Soft button to move cursor
3. Dial TIME BAND index number 1-4(e.g., 2)
OR
LCR ROUTE (05:2)
C:1 G:NONE M:---
Press Volume button to selected index and press
Right Soft button to move cursor
4. Dial LCR COS number 1-8(e.g., 4)
OR
LCR ROUTE (05:2)
C:4 G:NONE M:---
Press Volume button to selected COS and press
Right Soft button to move cursor