Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-233
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
A Toggles from upper case to lower case
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 715
Display shows
PGM.MESSAGE (01)
GIVE ME THE CALL
2. Enter index number(e.g., 11)
OR
PGM.MESSAGE (11)
_Blank Message
Press Volume button arrow to make selection
Press Right Soft button to move cursor
3. Enter message via dial keypad using the above
table(maximum 16 characters)
PGM.MESSAGE (11)
SunBathing
Use A button to toggle upper case/lower case
Press Right Soft button to return to step 2
4. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
TEN PROGRAMMED MESSAGES AS DETAILED BELOW
01. GIVE ME THE CALL
02. TAKE A MESSAGE
03. ASK THEM TO HOLD
04. SEND TO MY VM
05. TRANSFER TO MY SECY
06. LEAVE A MESSAGE
07. PAGE ME
08. OUT OF TOWN
09. IN A MEETING
10. IWILL CALL BACK
RELATED ITEMS
MMC 115 SET PROGRAMMED MESSAGE