Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-234 © SAMSUNG Electronics Co., Ltd.
716 UK LCR Options
This MMC provides U.K. LCR options as described below.
No Option Description
0 NETWORK CODE This table is used to network access code when the call is routed to the
secondary network. This table contains up to 16 entries. Each code has
4 digits maximum in length and use option for None, CCC, PIN or
Both.(Default : all codes are empty and all use options are none)
0 NONE This code doesn’t use.
1 CCC This code uses with Call Cast Code(CCC).
2 PIN This code uses with PIN Code.
3 BOTH This code uses with PIN code and Call Cast Code.
1 PIN CODE This table is used to PIN code when the call is routed to the secondary
network. This table contains up to 4 entries and each code has 10 digits
maximum in length.(Default : all tables are empty)
2 CCC OPTION This is used to which number used for Call Cost Code.
(Default : Station Number)
0 STATION NUMBER Station number uses for Call Cost Code.
1 NONE Doesn’t use Call Cost Code.
3 STATION PIN NO. This is assigned to PIN code table number for each station number.
(Default : all stations are 1)
This MMC is available in Australia, New Zealand and U.K. only
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Moves cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry