Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-235
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 716
Display shows
NETWORK CODE
01: USE:NONE
2. Enter option number(0-3) via dial keypad.
OR
NETWORK CODE
01: USE:NONE
Press Volume button to make selection and
press Right Soft button to move cursor
3. Enter entry number(01-16) via dial keypad.
OR
NETWORK CODE
01: USE:NONE
Press Volume button to make selection and
press Right Soft button to move cursor
4. Enter network access code via dial keypad
and press Right Soft button to move cursor
NETWORK CODE
01:1234 USE:NONE
5. Enter use option number(0-3) via dial keypad.
OR
NETWORK CODE
01:1234 USE:CCC
Press Volume button to make selection and
press Right Soft button to save and return step 3.
6 Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
NONE
RELATED ITEMS
MMC 400 TENANT ON/OFF PER TRUNK
MMC 310 LCR CLASS OF SERVICE
MMC 710 LCR DIGIT TABLE
MMC 711 LCR TIME TABLE
MMC 712 LCR ROUTE TABLE
MMC 713 LCR MODIFY DIGIT TABLE