Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00

Page 2-236 © SAMSUNG Electronics Co., Ltd.

718 MY Area Code

This MMC defines the home area code and country code. This information is used

for caller ID and ISDN calls in defining the area code on incoming calls. This MMC

removes the local area code to allow callback without digit modifications in LCR.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Moves cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 718

Display shows

MY AREA CODE

AREA :

2. Enter 0 for COUNTRY or 1 for AREA.

MY AREA CODE

AREA :

Press Volume buttons to make selection and

press Right Soft button to move cursor

3. Enter area code(maximum 4 digits) via dial

keypad(e.g., 2) and press Right Soft button to

MY AREA CODE

AREA :2

move cursor back to step 2.

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

NONE