Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00

Page 2-242 © SAMSUNG Electronics Co., Ltd.

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 722

Display shows

[201] KEY (MAST)

01:CALL1

2. Enter selected station number(e.g., 205)

[205] KEY (MAST)

01:CALL1

Press Volume button to select station and press

Right Soft button to move cursor

3. Enter selected key number(e.g., 18)

[201] KEY (MAST)

18:NONE

Press Volume button to select key number and

press Right Soft button to move cursor

4. Using above chart, press dial keypad key number

to make selection

[201] KEY PROG.

18:NONE

GPIK_

Press Volume button to make selection and press

Right Soft button to advance cursor to step 5 to

enter extender if required or to

return to step 2

5. If required, enter extender(e.g.,03)

[201] KEY PROG.

18:NONE

GPIK03

Press Volume button to make selection and

press Right Soft button to return to step 2

6. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

NONE