Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-244 © SAMSUNG Electronics Co., Ltd.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 723
Display shows
TYPE:24 BTN SETS
01:CALL1
"
2. Enter type of set via dial keypad(e.g.,1)
OR
TYPE:12 BTN SETS
01:CALL1
"
Press Volume button to make selection and
press Right Soft button
3. Enter key number(e.g., 03)
OR
TYPE:12 BTN SETS
03:NONE
"
Press Volume button to make selection and
press Right Soft button
4. Using table above, press dial keypad number
to make selection
TYPE:12 BTN SETS
03:NONE
"
GPIK
OR
Press Volume button to make selection and
press Right Soft button to advance cursor to step
5 to enter extender, if required
OR
Press Left Soft button to return to step 3
5. If required, enter extender(e.g.,03)
OR Press Volume button to make selection and
TYPE:12 BTN SETS
03:GPIK
"
GPIK03
press Right Soft button to return to step 2
6. Press Transfer button and enter to exit
OR Press Speaker button to advance next MMC
DEFAULT DATA
NONE
RELATED ITEMS
MMC 107 KEY EXTENDER
MMC 720 COPY KEY PROGRAMMING
MMC 721 SAVE STATION KEY PROGTRAMMING