Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-245
724 Dial Numbering Plan
This MMC allows the technician to change directory numbers for stations, trunks,
station groups, trunk groups and feature access codes. The system can be pre-
programmed with a default three or four digit numbering for station, station groups
and trunk numbers depending on the position of the DIP switches. There is an error
message provided to prevent the accidental duplication of a directory number or
feature access code.
No Number Type Description
00 STN DIAL NO. This is where station directory numbers are changed or assigned.
Default : 201-2xx, 3xx or 2001-2xxx
01 TRK DIAL NO. This is where trunk directory numbers are changed or assigned.
Default : 701-7xx or 7001-7xxx
02 MISC DIAL NO. This is where directory numbers for relays, MOH ports and the alarm
sensor are changed or assigned.
Default : Internal CHIME : 371
Internal MODEM : 3999
External MOH : 372-377
External PAGE & Relay : 361-369
Common Bell Relay : 3991-3993
Loud Bell Relay : 3995-3997
03 STNG DIAL
NUMBER
This is where station group numbers are changed or assigned.
Default : 500-5xx or 5001-5xxx
04 TRKG DIAL
NUMBER
This is where trunk group numbers are changed or assigned.
Default : The first is 9 or 0, 800-828
05 FEAT DIAL
NUMBER
This is where feature access codes are changed or assigned.
Dialling codes are entered via the dial keypad key by pressing the
dial keypad number the required steps to select the feature. For
example, for OHVA, the number 6 would be pressed three times.
NOTE) Please remember that this program is system-wide.
06 S0 STN DIAL NO. This is where directory numbers for BRI station ports mapping
terminal number.
Default : 8701-8748
07 NTWK LCR DIAL
NO
This is where additional LCR access codes are entered in the case
when two or more OfficeServ 12 system are networked together.
Default : NONE
08 VIRT EXT DIAL NO This is where virtual station directory numbers are changed or
assigned.
Default : SLT : 3501-3546, DGP : 3401-3480