Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-249
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button
Display shows
STN DIAL NUM:C1
DLI-01:201
"
2. Dial option number to make selection(e. g., 06)
OR
FEAT DIAL NUMBER
ABAND :64
"
_
Press Volume button to make selection and press
Right Soft button to advance cursor
3. Dial first letter of feature name(e.g., 7)
AND
FEAT NUMBER PLAN
PAGE :55
"
Press Volume button to make selection then
press Right Soft button to advance cursor
FEAT NUMBER PLAN
PARK :NONE
"
_
4. Enter digits(e.g., 63) via the dial keypad
FEAT NUMBER PLAN
PARK :NONE
"
63
5. Press Right Soft button to enter change and
continue to make changes
FEAT NUMBER PLAN
PARK :NONE
"
63
If an error message appears indicating
duplication of access code, enter 1 for YES for
SAME DIAL EXIST
CHANGE? Y:1,N:0
change or enter 0 for NO for no change
6. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
SEE DESCRIPTION
FEATURE CODES ARE DEPEND ON COUNTRY
RELATED ITEMS
ALL