Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-250 © SAMSUNG Electronics Co., Ltd.
725 SMDR Options
Allows the system administrator to select the information printed on the SMDR
report. The following options may be selected to print on SMDR :
No Option Default Description
00 PAGE HEADER YES This option determines whether a page header will print
at the top of each page. This would normally be turned off
if SMDR is being sent to a Call Accounting machine.
01 LINE PER PAGE 60 This option selects the length of each page to determine
when to print the SMDR header. The number of lines may
be in the range 01-99.
02 INCOMING CALL NO This option determines whether incoming calls will print
on SMDR.
03 OUTGOING CALL YES This option determines whether outgoing calls will print
on SMDR.
04 AUTHORIZE
CODE
NO This option determines whether authorization codes will
print on SMDR. If this option is set to NO, system make
AUTH field to ‘****’ on SMDR.
05 SMDR START
TIME
YES This option determines whether valid calls will include the
minimum call time in total call duration.
06 IN/OUT GROUP NO This option allows a message, IN GROUP or OUT
GROUP, to be printed in the digits dialled column each
time a station enters or leaves a group.
07 DND CALL NO This option allows a message, IN DND or OUT DND, to
be printed in the digits dialled column each time a station
enters or leaves DND.
08 WAKE-UP CALL YES This option determines whether stations receiving an
alarm reminder call will print on SMDR.
09 DIRECTORY
NAME
NONE This option allows the system administrator to enter a 16
character name which will appear on the SMDR header.
10 CALLER ID DATA YES This option can be selected to print Caller ID data
received from the Central Office on incoming calls.
This option requires the use of a 132 column(wide carriage)
printer or an 80 column printer set for condensed print.
11 ABANDON CALL YES If this option is set to YES, unanswered calls for which
CID information was received will print on SMDR.
13 NO. OF DIAL
MASK
0 If this option is set to a numeric value, the selected last
digits of the number dialled field will be masked as
asterisks (*) on the SMDR print out. Maximum masked
digits is 18. First 4 digits will not mask.