Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-262 © SAMSUNG Electronics Co., Ltd.
740 Station Pair
Assigns a secondary station to a phone. This secondary station can be a phone or
single line port. The secondary station assumes the Call Forwarding, Class of
Service, LCR Class, and DND attributes of the primary station.
If the COS is changed for either station in MMC 301 the change affects both stations.
Secondary stations when dialled will also ring the primary extension. Message from
secondary extension will display that(secondary) extension numbers. Callback to
extension(secondary) as well.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 740
Display shows
[201] PRIMARY
SECONDARY:NONE
2. Enter the primary station number via dial
keypad(e.g., 201)
[201] PRIMARY
SECONDARY:NONE
OR
Press Volume button to select and press Right Soft
button
3. Enter the secondary station number via dial
keypad(e.g., 205)
[201] PRIMARY
SECONDARY:205
OR
Press Volume button to select and press Right Soft
button
4. Press Transfer button and enter button to exit
OR
Press Speaker button to advance next MMC