Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-264 © SAMSUNG Electronics Co., Ltd.
750 VM System Restart
This MMC is only used for the external Samsung Voice Mail system(SVM-400).
When VMS starts or restarts it while download information about the OfficeServ 12
system it is installed.
This information is used by VMS to build a mailbox database.
This is quick way to initially configure a system, but is usually not necessary on
subsequent restarts. This
MMC can be used to turn on or off this database download and optionally restart the
VMS.
!
DOWNLOAD
NO-The database information will not be downloaded from keyphone system.
YES-The database information will be downloaded from keyphone system.
After VMS has been initially configured, it is advisable to set this to NO to
minimize boot up time.
!
PORT RESTART
NO-The VMS will not restart.
YES-The VMS will restart according to the DOWNLOAD option.
This option can be used at any time to reset the external VMS(SVM-400).
!
VIRTUAL NUMBER DOWNLOAD
This option is determine which type virtual port include during mailbox and
system numbering plan downloading procedure.
The virtual port type are followed :
No Port Type Description
0 VIRTUAL EXT Virtual extension number
1 IP PHONE IP-based phone number
2 DECT PHONE DECT terminal number
3 WIP WITH WLI Wireless IP-based mobile phone number works with WLI
4 BRI STATION ISDN terminal number
5 VOIP NET TRK VoIP networking trunk number
6 VOIP 323 TRK VoIP H.323 trunk number
7 VOIP SIP TRK VoIP SIP trunk number
8 REMOTE STN Remote station number via networking