Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-2 © SAMSUNG Electronics Co., Ltd.
100 Station Lock
Allows the system administrator or technician to lock or unlock an individual station
or all stations simultaneously. The three options are as follows :
No Option Description
0 UNLOCKED Unlocks a locked station.
1 LOCKED OUT The phone cannot make calls outside the system. It can however make
and receive intercom calls and receive incoming Trunk Line calls. When
in this mode the Hold button of the phone will flash slow RED.
2 LOCKED ALL The phone cannot make or receive any calls. When in this mode the Hold
button of the phone will light steady RED.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
!
ANS/RLS Used to select ALL
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 100
Display shows
[201] STN LOCK
UNLOCKED
2. Dial station number(e.g., 205)
OR
[205] STN LOCK
UNLOCKED
Press Volume button to select station and use
Right Soft button to move cursor
OR
Press ANS/RLS button to select all stations
[ALL] STN LOCK
?
3. Enter 0 to unlock or 1 to lock(e.g., 1)
OR
[205] STN LOCK
LOCKED OUT
Press Volume button to make selection and press
Right Soft button to return to step 2
4. Press Transfer button and enter to save and exit
OR
Press Speaker button to save and advance to next
MMC