Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-273
756 Assign VM MOH
This MMC is only used for the Samsung Voice Mail System(SVM-400).
This MMC is used to assign the Music on Hold source for the DCS-408/408i from a
sound file located on the SVM-400 hard disk drive. The 100 available sound files are
defined as numbers 5000 to 5099.
Basically SVM-400 supports various music for numbers 5000 to 5099. If you want to
use default SVM-400 support music, select the number. Otherwise, make sure you
record the sound file first. The next step is to assign the sound file to a SVM-400 port.
For example, if you record sound file 5025 you would associate 25 with a specific
SVM-400 port, e.g. 201. This will dedicate the port for use only as MOH and remove it
from group. Now 201 will show up as a valid music source in MMC 308, 309 and 408.
Each Music on Hold source assigned here requires one SVM-400 port.
If the first SVM-400 port is used for VMMOH, it must be disabled before boot up since
SVM-400 and the OfficeServ 12 use port 1 during boot up to exchange critical
information. For this reason we suggest you use the last port as VMMOH ports.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SPEAKER Used to advance next MMC
!
HOLD Used to delete an entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 756
Display shows
SET VMMOH
209 : NOT USE
2. Dial VM number
OR
SET VMMOH
215 : NOT USE
Press Volume button to make a selection and
press Right Soft button to move cursor
3. Enter VM message number
OR
SET VMMOH
215 : 25
Press Volume button to make a selection and
press Right Soft button to move cursor
4. Press Transfer button and enter button to exit
OR
Press Speaker button to advance next MMC