Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-279
802 Customer Access MMC Number
Allows the System Administrator to have access to certain MMCs. For example,
it is required that the System Administrator customer have access to MMC 102 Call
Forward for call forwarding but it is not required that the System Administrator have
access to MMC 710 LCR Digit Table for LCR dial plans. This MMC is for both
tenants.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 802
Display shows
CUST.USE MMC :1
100:STN LOCK:YES
2. Enter desired tenant number(1-2) via dial keypad
OR
MMC TENANT:1
100:STN LOCK:YES
Press Volume button to make selection and
press Right Soft button to move cursor
3. Enter desired MMC number via dial keypad
OR
MMC TENANT:1
102:CALL FWD:YES
Press Volume button to make selection and
press Right Soft button to move cursor
4. Enter 1 for YES or 0 for NO via dial keypad
OR
MMC TENANT:1
102:CALL FWD:NO
Press Volume button to make selection and
press Left Soft button to return to step 3 to
make additional entries
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
NONE
RELATED ITEMS
NONE