Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-280 © SAMSUNG Electronics Co., Ltd.
803 Assign Tenant Group
Allows the assignment of tenant groups on a port basis.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 803
Display shows
TENANT GROUP
C:1 S:1 -01 T:1
2. Enter cabinet number if no change press
Right Soft button to move cursor
TENANT GROUP
C:1 S:1 –01 T:1
3. Enter slot number if no change press RIGHT
Soft button to move cursor
TENANT GROUP
C:1 S:2 -01 T:1
4. Enter port number if no change press
Right Soft button to move cursor
TENANT GROUP
C:1 S:2 -03 T:1
5. Enter tenant number if no change press
Right Soft button to return to step 2
TENANT GROUP
C:1 S:2 -03 T:2
6. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
PROCEDURE DISPLAY
1. Press Transfer button and enter 803
Display shows
TENANT GROUP
PORT:HYB-02 T:1
2. Enter port number if no change press
Right Soft button to move cursor
3. Enter tenant number if no change press
Right Soft button to return to step 2