Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-283
This MMC should not be changed from the default levels without the assistance of the
local SAMSUNG distributor.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 805
Display shows
TX LEVEL CONTROL
LEVEL 0
"
0
2. Press Volume button to make selection(0-3)
TX LEVEL CONTROL
LEVEL 1
"
1
After selection is made, press Right Soft button
to move cursor.
3. (When the TX LEVEL CONTROL is selected)
a. Select the desired volume level via dial keypad
OR
TX LEVEL CONTROL
LEVEL 1
"
1
Press Volume button to go to the next volume
level and press Right Soft button.
b. Enter desired volume data via dial keypad
OR
TX LEVEL CONTROL
LEVEL 1
"
3
4. (When the MISC TSW GAIN is selected)
a. Enter desired MISC/BGM TSW gain via dial
keypad
MISC TSW GAIN
BGM/MOH :0
OR
Press Volume button to select desired MISC/BGM
TSW gain and press Right Soft button.
5. (When the TSW GAIN CONTROL is selected)
a. Select the TX TSW connect type via dial button pad
OR
TSW GAIN CONTROL
SLT
"
DGP :+0.0
Press Volume button to go to the next TX TSW
connect type and press Right Soft button.