Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-286 © SAMSUNG Electronics Co., Ltd.
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 807
Display shows
VOL.CONTROL:US24
KEY TONE VOL:1
2. Enter phone type via dial keypad
OR
VOL.CONTROL:EU24
KEY TONE VOL:1
Press Volume button to make selection and
press Right Soft button to move cursor.
3. Enter volume item via dial keypad
OR
VOL.CONTROL:EU24
SIDETONE VOL:1
Press Volume button to make selection and
press Right Soft button to move cursor.
4. Enter volume data via dial keypad
OR
VOL.CONTROL:EU24
HANDSET TX :6
Press Volume button to make selection and
press Right Soft button to save and return step 3.
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC
DEFAULT DATA
DEPEND ON PHONE TYPE
21D
KEY TONE VOL : 1
SIDETONE VOL : 1
HANDSET TX : 4
MIC TX LEVEL : 3
NOISE GUARD : 8
NOISE THRES. : 1
ALC THRES. : 7
TX/RX THRES. : 3
TX/RX COMP. : 5
MIN RX VOL : 6