Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00

Page 2-4 © SAMSUNG Electronics Co., Ltd.

101 Change User Passcode

Allows the system administrator or technician to reset any phone’s passcode to its

default value of ‘1234’. This MMC cannot display station passcodes ; it can only

reset them to default.

Phone users can set or change their individual passcodes. The passcode is used to

lock or unlock the phone for toll restriction(call barring) override and to access the

DISA feature.

Default passcodes cannot be used for toll restriction override or for DISA access.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 101

Display shows

[201] PASSCODE

PASSCODE:****

2. Dial phone number(e.g., 205)

[205] PASSCODE

PASSCODE:****

Use Volume button to scroll through phone

numbers and press Right Soft button to move

the cursor right

3. Press Hold button to reset passcode

[205] PASSCODE

PASSCODE:1234

4. Press Transfer button and enter to exit

Press Speaker button to advance next MMC

DEFAULT DATA

ALL STATION PASSCODES : 1234