Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-292 © SAMSUNG Electronics Co., Ltd.
815 Customer Database Copy
Provides a means to copy the customer database to the FMDB(Smart Media card
Data Base). This enables the on board database(SRAM) to be copied to the FMDB
and also allows the FMDB database to be copied to the on board database. A daily
save can be programmed to automatically save the on board data base to the FMDB.
This insures that an up to date database is always available in the case of a
catastrophic failure. A daily save time of 00:00 means there is no save performed.
It is recommended to CLEAR the FMDB before the SRAM is copied to it. When the
SRAM is copied to the FMDB there is no interruption in service. If the FMDB is
copied to the SRAM the system will reset to accept the new data.
Database Type Description
FMDB Flash Memory Database
SRAM On-Board database
S:mm/dd/yy hh:mm Indicates the time the database was saved to the FMDB or the time the
SRAM was last saved
DAILY SAVE hh:mm The time the SRAM will be saved to the FMDB
A Smart Media card of 16 MB or 32 MB must be installed in order to copy the on
board database(SRAM) on to the Smart Media card(FMDB).
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 815
Display shows
CUST DBASE:FMDB
S:12/01/01 00:00
If the Smart Media is used already, the display
shows
CUST DBASE:FMDB
SMART IS BUSY
2. Press Right Soft button to move cursor
CUST DBASE:FMDB
S:12/01/01 00:00