Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

820 Assign System Link ID

This MMC is used to assign the system link ID for PRI and VoIP networking.

Up to 50 link Ids can be entered including SELF ID. In addition each Link ID is also

associated with the IP address for that system and IP address type.

Option Description

LINK ID System ID for networking feature.

SIGNAL G/W System IP address for VoIP networking

IP TYPE System IP address type for VoIP networking. SELF system IP address type

determines ‘SYSTEM IP TYPE’ on MMC 830.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SPEAKER Used to advance next MMC

HOLD Used to delete an entry

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 820

Display shows

SYSTEM LINK ID

SELF :

2. Enter SELF link ID via dial keypad and

press Right Soft button

SYSTEM LINK ID

SELF :11

3. Press Volume button to select other link ID

and press Right Soft button to mover cursor.

SYSTEM LINK ID

NO.01:

4. Enter other link ID via dial keypad and

press Right Soft button

SYSTEM LINK ID

NO.01:22

5. Press Transfer button and enter button to exit.

Press Speaker button to advance next MMC