Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

102 Call Forward

Allows the system administrator to program the call forward destinations for other

station users. This MMC also allows call forward to be set after the destination has

been entered.

Allows several types of call forwarding : FORWARD ALL, FORWARD NO

ANSWER, FORWARD BUSY and FORARD DND. There is an additional option,

FORWARD BUSY/NO ANSWER, that allows both of these options to be activated

at the same time, provided that destinations have been entered for both.

0 : FORWARD CANCEL

1 : FORWARD ALL CALL

2 : FORWARD BUSY

3 : FORWARD NO ANSWER

4 : FORWARD BUSY/NO ANSWER

5 : FORWARD DND

All types forwarding can be set external number. In MMC 701 Class of Service, if

‘FORWARD’ is set ‘OFF’, you cannot set call forward but can cancel it. And if ‘EXT

FWD’ is set ‘OFF’, you cannot set external number.

PROGRAM BUTTONS

VOLUME Used to scroll through options

KEYPAD Used to enter selections

SOFT Move cursor left and right

SPEAKER Used to advance next MMC

HOLD Used to clear previous entry

ACTION

PROCEDURE DISPLAY

1. Press Transfer button and enter 102

Display shows

[201] FORWARD

0:FORWARD CANCEL

2. Dial station number(e.g., 205)

[205] FORWARD

0:FORWARD CANCEL

Press Volume button to select station and press

Right Soft button to move cursor