Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-303
824 Network Dial Translation
Assigns the digit translation table used for networking. Generally under networking
condition, you must dial the node ID and extension number to call the another node
extension. It’s not convenient. In this MMC, the system provides the easy digit
translation of NETWORK LCR DIAL number. The translated digits are works like as
LCR plus translated digits. Using this MMC, you only dial the another node
extension number and call the another node extension simply. The system provides
96 entry of network dial translation.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
!
HOLD Used to clear previous entry
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 824
Display shows
01:601
"
SZ:0 MAX:00 MB:N
2. Dial the entry number
OR
01:601
"
_
SZ:0 MAX:00 MB:N
Press Volume button to select and press
Right Soft button to move cursor
3. Enter digit string(max. 8digits) and press
Right Soft button to move cursor
01:601
"
60201
SZ:0 MAX:00 MB:N
4. Enter the minimum number of user dialled digits
OR
01:601
"
60201
SZ:3 MAX:00 MB:N
Press Volume button to select and press
Right Soft button to move cursor
5. Enter the waiting number of dial until LCR is
operated
01:601
"
60201
SZ:3 MAX:06 MB:N
OR
Press Volume button to select and press
Right Soft button to move cursor