Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-306 © SAMSUNG Electronics Co., Ltd.
829 LAN Printer Parameter
This program sets the various parameters required for printing to a LAN connected
device.
The three types of data listed below can be displayed using the LAN printer.
01 : SMDR
02 : TRAFFIC REPORT
03 : ALARM REPORT
The items that are set in this program are listed below :
No Option Default Description
00 DATA TYPE Type of data to be displayed
01 CURR STATUS OFF Current status of the LAN printer
02 EMPTY BUFF NO Prints all data left in the buffer
03 UPDATE LAN NO Applies modified items
04 DESTINATION OFF Data transmit destination(Off, Printer, PC, Both)
05 PRINTER IP 200.1.1.1 The IP address of the LAN printer
06 PRINTER TCP 10010 The TCP port of the printer
07 LAN TCP 10020 LAN TCP port
08 RETRY COUNT 03 Re-transmit attempt count(00-10)
09 RETRY WAIT 010 sec Wait time for re-transmit(005-250 sec)
10 PJL ENABLE FALSE Sets PJL(0. FALSE, 1. TRUE)
11 LANGUAGE RAW Printer language(0. RAW, 1. PCL, 2. PS)
12 PAPER SIZE LETTER Paper size(0. A4, 1. LETTER)
13 FONT TYPE COURIER Font type(0.COURIER, 1.TIMES NEW ROMAN)
14 DUPLEX ENAB FALSE Sets duplex(0. FALSE, 1. TRUE)
15 ORIENTATION PORTRAIT Orientation(0. PORTRAIT, 1. LANDSCAPE)
16 PRINT TRAY DEFAULT Printer tray(0.Default, 1.Tray1, 2.Tray2, 3.Manual)
17 RESOLUTION 300 Resolution(0.300, 1.600)
18 LINE/PAGE 60 Line per page