Installation guide

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming
© SAMSUNG Electronics Co., Ltd. Page 2-313
833 VoIP IP Table
This MMC provides the IP addresses in tables pointed to by the VoIP code entry
(MMC832). There are 63 tables with up to 16 entries each. The destination IP
address is required to route dialled digits based on the access code and digits dialled.
The IP entry field is divided into 4 sections allowing modification of separate IP
address fields.
When changing any IP address/value, three digits must be input for each(octet) field.
Example) 192.168.1.10 input must be : 192 168 001 010
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 833.
Display shows the first table number.
TB(00) ENTRY (00)
0. 0. 0. 0
2. Enter table number(00-62) via dial keypad.
OR
TB(00) ENTRY (00)
0. 0. 0. 0
Press Volume button to make select ion and
press Right Soft button to move cursor.
3. Enter entry number(00-15) via dial keypad.
OR
TB(00) ENTRY (00)
0. 0. 0. 0
Press Volume button to make select ion and
press Right Soft button to move cursor.
4. Enter IP address via dial keypad.
Cursor will be return step 3.
TB(00) ENTRY (00)
165.213. 87.110
5. Press Transfer button and enter to exit
OR
Press Speaker button to advance next MMC entry.