Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-318 © SAMSUNG Electronics Co., Ltd.
No Parameter Description
12 MAX FAX CNT This is maximum number of channels that can be simultaneously utilized
for Fax-over-IP. The range is 00-16. Default is 2.
13 DTMF TYPE There are two types of DTMF transmission : INBAND, which is industry
standard(H.245) type DTMF transport, and OUTBAND which is a
Samsung proprietary method.
14 TOS FIELD An eight-bit binary value that will be utilized by external routers, switches,
etc(that optionally support TOS-bit prioritization)-to identify the transport-
priority value of data packets generated by the MGI card. This value can
be left at default value(00000) if your network infrastructure does not
support this method of bandwidth management. Default is all bits 0.
15 FAX RETRY This option selects retry count of Fax-over-IP, in the case that errors are
detected. The range is 0-4 and 0 means no retry. Default is 3.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to advance next MMC
ACTION
PROCEDURE DISPLAY
1. Press Transfer button and enter 835
Display shows the first option
MGI:AUDIO CODEC
G.729A
2. Enter MGI type(0-2) via dial keypad
OR
MGI:AUDIO CODEC
G.729A
Press Volume button to make selection and
press Right Soft button to move cursor
3. Enter MGI DSP parameter via dial keypad
OR
MGI:AUDIO CODEC
G.729A
Press Volume button to make selection and
press Right Soft button to move cursor
4. Enter MGI DSP parameter
OR
MGI:AUDIO CODEC
G.729
Press Volume button to make selection and
press Right Soft button to save and return step 3.