Installation guide

CHAPTER 2. MMC Programming OfficeServ 12 Programming Guide/Ed.00
Page 2-326 © SAMSUNG Electronics Co., Ltd.
No Information Description
12 TOS FIELD An eight-bit binary value that will be utilized by external routers, switches,
etc(that optionally support TOS-bit prioritization)-to identify the transport-
priority value of data packets generated by the IP phone. This value can
be left at default value(00000) if your network infrastructure does not
support this method of bandwidth management. This data uses case of
MMC 841 ITP DSP PARA DOWN=PHONE DATA only. Default is all bits
0.
13 S/W VERSION Display IP phone software version. This read only data.
14 S/W UPGRADE This is used IP phone software upgrade request command. When this
selects YES and press Right Soft button, the system requests to IP phone
software upgrade with TFTP IP address.
PROGRAM BUTTONS
!
VOLUME Used to scroll through options
!
KEYPAD Used to enter selections
!
SOFT Move cursor left and right
!
SPEAKER Used to store data and advance to next MMC
ACTION
PROCEDURE DISPLAY
1. Press TRSF 840
Display shows
[3201]USER ID
3201
2. Enter IP phone number via dial keypad.
OR
[3210]USER ID
3210
Press Volume button to make selection and
press Right Soft button to move cursor
3. Enter IP phone option number via dial keypad.
OR
[3210]DSP TYPE
G.729A
Press Volume button to make selection and
press Right Soft button to move cursor
4. Enter option data via dial keypad.
OR
[3210]DSP TYPE
G.711
Press Volume button to make selection and
press Right Soft button to save and return step 3.